Looking for:

Download Ford Fusion Hybrid – Owner’s Manual PDF ( Pages)

Click here to Download

Page Tire Inflation Always inflate your tires to the Ford recommended gord pressure even if it is less than the maximum inflation pressure information found on the tire. Illuminated entry The на этой странице lamps and puddle lamps if equipped illuminate when the Integrated Keyhead Transmitter is used to unlock the door s. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased.

2010 ford fusion se owners manual download

Power distribution box 6. These products are available from your authorized dealer. Repairs will be made using Ford or Motorcraft parts, or remanufactured or other parts that are authorized by Ford. Посетить страницу manual. Capture a web page as it appears now for use as a trusted citation in the future.


2010 ford fusion se owners manual download

See pricing for the Used Ford Fusion SE Sedan 4D. Get KBB Fair Purchase Price, MSRP, and dealer invoice price for the Ford Fusion SE Sedan . Download manual. Advertisement. Download Ford Fusion Owner’s Manual Related Manuals for Ford Fusion. Automobile Ford Wrecker Towing Manual 6 pages. Ford motor company automobile accessories user manual. Automobile. To download the Owner Manual, Warranty Guide or Scheduled Maintenance Guide, select your vehicle information: Year *. Choose Year Year cannot be blank. Make*. Choose Make.


FORD FUSION OWNER’S MANUAL Pdf Download | ManualsLib – PDF Document Details


Auxiliary Input Jack Line In. Climate Controls. Navigation System Based Climate Control. Rear Window Defroster. Turn Signal Control. Bulb Replacement. Driver Controls. Steering Wheel Adjustment. Power Windows. Speed Control. Owners Guide, 2nd Printing.

USA fus. Previous Page. Next Page. Automobile Ford F Owner’s Manual pages. Ford fusion hybrid automobile owner’s manual pages. Ford may change the contents without notice and without incurring obligation. Please take the time to get well acquainted with your vehicle by reading this handbook.

The more you know and understand about your vehicle, the greater the safety and pleasure you will derive from driving it. Page 5 Do not add friction modifier compounds or special break-in oils since these additives may prevent piston ring seating.

See Engine oil in the Maintenance and Specifications chapter for more information on oil usage. Page 6 In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may Page 8 If you do not want Ford or its vendors to receive this information, do not activate the service.

Ford Motor Company and the vendors it uses to provide you with this information do not store your vehicle travel information. Features or equipment listed as standard may be different on units built for Export. Normal braking is still functional unless the brake warning light also is illuminated.

Page 14 Refer to the Driving chapter for more information. Refer to the Driving chapter for more information. Anti-theft system: Flashes when the SecuriLock passive anti-theft system has been activated.

Page 16 Turn signal on warning chime: Sounds when the turn signal has been left on for an extended period of time. Page 18 this represents the trip mode. Press the control again to select Trip A and Trip B features.

If the warning stays on after the park brake is off, contact your authorized dealer as soon as possible. For more information on integrated key, refer to the Locks and Security chapter.

Ford strongly recommends that drivers use extreme caution when using any device that may take their focus off the road. Remove the CD. If you do not remove the CD, the system will reload the disc. The system will eject all discs and prompt you when to remove them. Otherwise, random play will begin when the current track is finished playing. The system will only shuffle the currently playing disc.

Page 35 PIN number to its initial password setting Page 36 OK. For further information, refer to the SYNC information included with your vehicle for further information. Never touch the playing surface. Page 40 CD units are designed to play commercially pressed 4. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Do not use any irregular shaped CDs or discs with a scratch protection film attached.

Page Page 43 Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes. This message should disappear shortly. If this message does not clear within a short present. Page Climate Controls : Distributes air through the instrument panel vents, demister vents, floor vents and rear seat floor vents if equipped.

To return to full automatic control, press AUTO. See Heated seats in the Seating and Safety Restraints chapter. Press this button again to return to the previous air flow selection.

To return to full automatic mode, press AUTO. Page 54 3. Select recirculated air to provide colder airflow. Set highest fan setting initially, then adjust to maintain comfort.

Page Rear Window Defroster This may cause damage to the heated grid lines and will not be covered by your warranty. Start with the ignition in the off position and the headlamp control in the autolamp position.

Turn the headlamp control to off. Turn the ignition switch to on and then back to off. Failure to activate your headlamps under these conditions may result in a collision. This will turn on the interior courtesy lights.

The lights will remain on until the bottom of the control is pressed. Press the controls to turn on the lamps. All replacement bulbs are clear in color except where noted. To replace all instrument panel lights – see your authorized dealer.

Locate the mass air flow sensor electrical connector on the air outlet tube. This connector will need to be unplugged. Remove the air filter assembly. Remove the rubber headlamp bulb access cover. Page 64 4. Remove the bulb socket by rotating it counterclockwise, then pull it straight out of the lamp assembly.

Make sure headlamp control is in the off position, then open the hood. At the wheel well, remove the press pins from the splash shield. Page 66 Turn the headlamps on and make sure they work properly. If the headlamp was correctly aligned before you changed the bulb, you should not need to align it again. Reaching through the wheel well, remove the rubber headlamp bulb access cover. Rotate the headlamp bulb counterclockwise and remove the headlamp bulb 5.

Disconnect the electrical connector. Carefully pull bulb straight out of socket and push in the new one. Install new bulb socket into the lamp assembly by aligning the indexing fingers, then rotate clockwise to locked position.

Reach over the front bolster to access the bulb. Reverse these steps to complete the process. Page 70 3. Rotate the lamp clockwise while holding the electrical connector in place.

After rotating the lamp 90 degrees clockwise, pull and disengage the wire harness and bulb from the lamp. Doing so may result in permanent deformation. Remove the screws from the license plate lamp assembly. Remove bulb socket by turning counterclockwise. Carefully pull the bulb out from the socket. Install new bulb s in reverse order.

Carefully disconnect the bulb from the harness assembly via the two snap clips. Install the new bulb in reverse order. Page 76 This variation is four degrees between adjacent zones and will become noticeable as the vehicle crosses multiple zones. A correct zone setting will eliminate this error.

Refer to Compass zone adjustment. Start the vehicle. Page 78 3. Hard objects can injure you in a collision. Always keep the power point caps closed when not being used.

Refer to Rearview camera system in the Driving chapter. Page 84 Disengaging the speed control will not erase the previous set speed. Note: When you use the clutch pedal to disengage the speed control, the engine speed may briefly increase, this is normal. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased.

Press to activate phone mode or answer a phone call. Press and hold to end a call or exit phone mode. To stop motion at any time during the one-touch operation, press the control a second time. Page 88 The moon roof has a sliding shade that can be opened or closed when the glass panel is shut. To close the shade, pull it toward the front of the vehicle Fusion fsn Owners Guide, 2nd Printing USA fus Page 89 if equipped may be used for up to 10 minutes after the ignition switch is turned off or until any door is opened.

It is recommended that you keep the label in a safe place for future reference. Turn the ignition to the off position. The horn will chirp once to confirm the procedure is complete. Keyless entry keypad procedure 1. Turn the ignition to the 1 off position. Close all the doors. Enter factory—set 5—digit entry code.

If the procedure needs to be repeated, wait a minimum of 30 seconds before beginning again. The user should receive a horn chirp to indicate the system has been disabled or a chirp followed by a honk to indicate the system has been enabled. Page 96 Exposure of people or animals to these high temperatures for even a short time can cause death or serious heat-related injuries, including brain damage. Small children are particularly at risk. Note: The interior lamps will illuminate. Illuminated entry The interior lamps and puddle lamps if equipped illuminate when the Integrated Keyhead Transmitter is used to unlock the door s.

This mode disables the keypad for one minute and the keypad lamp will flash. Use of these systems may result in vehicle starting problems and a loss of security protection. Page The theft indicator will flash every two seconds to act as a theft deterrent when the vehicle is armed. Automatic disarming The vehicle is disarmed immediately after the ignition is turned to the on position.

Page Steps 1 through 8. If failure repeats, bring your vehicle to your authorized dealer to have the new key s programmed. To program additional new unprogrammed key s , wait 20 seconds and then repeat this procedure from Step 1.

Whenever possible it should be installed and properly adjusted when the seat is occupied. Lift handle to move seat forward or backward. Move the seat as far forward as possible. Secure the load to help prevent shifting during sudden stops. Refer to Front passenger sensing system in the Airbag supplemental restraint system SRS section for additional details. Failure to follow these instructions may interfere with the front passenger seat sensing system.

Power recline if equipped Press the control to recline the seatback forward or rearward. Store the head restraint in a secure location, such as the trunk of the vehicle. Split-folding rear seatbacks One or both rear seatbacks can be folded down to provide additional cargo space.

Unless serviced, the system may not function properly in the event of a collision. How to disengage the automatic locking mode WARNING: Ford Motor Company recommends that all passenger safety belt assemblies and attaching hardware should be inspected by an authorized dealer after any collision to verify that the automatic locking retractor feature for child seats is still working properly. Page Safety belt warning light and indicator chime The safety belt warning light illuminates in the instrument cluster and a chime sounds to remind the occupants to fasten their safety belts.

The Belt-Minder feature will not activate. Airbags offer greater protection when used with safety belts. Do not modify the front end of the vehicle. Front airbags are designed to activate in frontal and near-frontal collisions, not rollover, side-impact, or rear-impacts unless the collision causes sufficient longitudinal deceleration.

When the passenger airbag off light is illuminated, the passenger side airbag may be disabled to avoid the risk of airbag deployment injuries. Page SRS, its fuses or the seat cover on a seat containing an airbag. Contact your authorized dealer as soon as possible. Do not touch them after inflation. If the air curtain is not replaced, the unrepaired area will increase the risk of injury in a collision.

Also see Airbag supplemental restraint system SRS in this chapter for special instructions about using airbags. Page Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in a front seating position. Page Highway Traffic Safety Administration NHTSA provides education and training to ensure that all children ages 0 to 16 are properly restrained in the correct restraint system.

Page Children 12 and under should be properly restrained in a rear seating position whenever possible. If all children cannot be seated and restrained properly in a rear seating position, properly restrain the largest child in the front seat. Make sure the tongue is securely fastened in the buckle.

Position the child safety seat in a seat with a combination lap and shoulder belt. Attach the tether strap if the child seat is equipped.

Refer to Attaching child safety seats with tether straps later in this chapter. See Attaching child safety seats with tether straps and Recommendations for attaching safety restraints for children in this chapter for more information.

To avoid risk of injury, occupants should only use seating positions where they are able to be properly restrained. Refer to Recommendations for attaching child safety restraints for children in this chapter. Locate the correct anchor for the selected seating position. If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, Ford also recommends its use. Child booster seats The belt-positioning booster booster seat is used to improve the fit of the vehicle safety belt.

Page To improve the fit of both the lap and shoulder belt on children who have outgrown child safety seats, Ford Motor Company recommends use of a belt-positioning booster.

Move a child to a different seating location if the shoulder belt does not stay positioned on the shoulder during use. Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a collision be replaced. Department of Transportation-Tire quality grades: The U.

Department of Transportation requires Ford Motor Company to give you the following information about tire grades exactly as the government has written it. You are strongly urged to buy a reliable tire pressure gauge, as automatic service station gauges may be inaccurate.

Ford recommends the use of a digital or dial-type tire pressure gauge rather than a stick-type tire pressure gauge. Page Tire Inflation Always inflate your tires to the Ford recommended inflation pressure even if it is less than the maximum inflation pressure information found on the tire. Page For your safety, tires that are damaged or show signs of excessive wear should not be used because they are more likely to blow out or fail. Page The tire pressure sensors mounted in the wheels originally installed on your vehicle are not designed to be used in aftermarket wheels.

Page Rotating your tires at the recommended interval as indicated in the scheduled maintenance information that comes with your vehicle will help your tires wear more evenly, providing better tire performance and longer tire life. These ratings are listed in the following chart. The tire suppliers may have additional markings, notes or warnings such as standard load, radial tubeless, etc. Page 4. Maximum Load Single lb kg at psi kPa cold: Indicates the maximum load and tire pressure when the tire is used as a single; defined as two tires total on the rear axle.

Refer to the payload description and graphic in the Vehicle loading — with and without a trailer section. Page Automatic Relocking Locks Locking and unlocking the Reprogramming the doors with the remote unlocking function control You can reprogram the unlocking function so that only the driver’s door is unlocked or all doors are unlocked.

Press the lock and unlock buttons on the remote control at the same time for four seconds with the ignition switched off. If possible, provide them with the key number from the tag provided with the original keys. You can also obtain additional keys from your Ford Dealer.

Automatic arming delay The 20 seconds arming delay begins when the bonnet, luggage compartment and all doors are Volume down: Pull the VOL switch towards the steering wheel.

Release the locking lever to adjust the height of the steering wheel and its distance from the driver. Switch off the autowipers feature before entering a car wash. Replace the wiper blades as soon as they begin to leave bands of water and smears or when they do not completely remove water from the windscreen.

Thereafter, or when the ignition is switched on with autowipers selected, the wipers will not cycle until water is detected on the windscreen. The rear wiper will follow the front wiper interval at intermittent or normal speed. To remove, press the retaining clip in the direction of the arrow, disengage the wiper blade and pull it off the arm in the opposite direction. The headlamps will come on and go off automatically depending on the ambient light.

To switch on the rear fog lamps, switch off the autolamps feature. Switch on the exterior lamps 1 and pull out the control two positions 2. E For item location: See Quick start page 8. Page Removing A Headlamp Lighting If you set the switch to position B, the courtesy lamp will come on when you unlock or open a door or the tailgate.

If you leave a door open with the ignition switch off, the courtesy lamp will go off automatically after some time to prevent the vehicle battery from discharging. Let the bulb cool down before removing it.

Only fit bulbs of the correct specification. See Bulb specification chart page Page 50 Lighting 2. Remove the cover. Disconnect the electrical connector. Release the clip and remove the bulb. Side lamps 1. Remove the headlamp. See Removing a headlamp page E 2. Turn the bulb holder anticlockwise and remove it. Page Rear Lamps Lighting Front fog lamps 2. From inside the luggage compartment, remove the wing nut on the back of the rear lamp. Remove the screws and remove the rear lamp assembly.

Release the clips and remove the bulb holder. E 1. Loosen the screws and remove the lamp. Remove the bulb. Interior lamp E 1. Open the tailgate. Remove the rubber grommet. Release the clips using a E flat-bladed screwdriver and remove the lamp. Carefully prise out the lamp. Remove the lens. E 3. Turn the bulb holder anticlockwise Reading lamps and remove it. Luggage compartment lamp E E Note: If you operate the switches often during a short period of time, the system might become inoperable for a certain time to prevent damage due to overheating.

They will switch on automatically when you switch the heated rear window on. Shows the temperature of the engine coolant. At normal operating temperature, the needle will remain in the centre section. Page Warning Lamps And Indicators Instruments If the needle enters the red section, If a warning lamp or indicator does the engine is overheating.

Stop the not come on when you switch the engine, switch the ignition off and ignition on, this indicates a determine the cause once the malfunction.

The front fog lamp indicator will come on when you switch the front fog lamps If the brake system warning lamp comes on with the ABS warning lamp or the stability control warning lamp, Frost warning lamp this indicates a malfunction. Page Main Beam Indicator Instruments Main beam indicator Powertrain warning lamp The main beam indicator will Vehicles with an automatic come on when you switch transmission the headlamp main beam If the powertrain warning on.

It will flash when you use the lamp comes on when the headlamp flasher. Page 62 Instruments If the powertrain warning lamp flashes when the engine is running, this indicates a malfunction. Stop your vehicle as soon as it is safe to do so. Have this checked before continuing your journey.

Note: The information display will remain on for several minutes after you switch off the ignition. Page Information Displays Information displays Type 2 information display Press the button to scroll through the displays and hold the button to rest, select a submenu or change a setting. You can change the settings of Language various functions through the information display. You can set the display to your preferred language.

Check the brake fluid level. See Maintenance page If the ABS warning lamp or the stability control warning lamp also come on, this indicates a malfunction. Avoid heavy accelera- tion or deceleration. The transmission will continue to operate but you will notice some unusual conditions.

Have this checked as soon as possible. Page 68 Information displays Message Message indic- Meaning ator message is still displayed, switch the ignition off and have this checked before continuing your journey. If the message is no longer displayed, you can continue your journey and have this checked as soon as possible. The Outside air resulting condensation is directed to the outside of the vehicle and it is Keep the air intakes forward of the therefore normal if you see a small windscreen free from obstruction E Windscreen Footwell and windscreen Face level Page Climate Control Climate control Heating the interior quickly Face level and footwell Footwell Face level, windscreen and footwell You can set the air distribution control to any position between the symbols.

A small amount of air is always E directed towards the windscreen. Switching the air conditioning on and off Defrosting and demisting Page Automatic Climate Control Climate control Cooling the interior quickly The system controls the temperature, amount and distribution of the air flow automatically and adjusts them according to the driving and weather conditions.

Pressing the AUTO button once switches on the auto mode. Note: Avoid adjusting the settings when the vehicle interior is extremely hot or cold. Page Heated Windows And Mirrors Climate control Note: When the system is in auto Heated windscreen mode and the interior and exterior temperatures are quite hot, the system selects recirculated air E automatically to maximise cooling of the interior.

Once the selected Heated rear window temperature is reached, the system will reselect outside air automatically. Page Rear Seats Seats Creating a level load floor Pull the locking lever to return the seatback to the vertical position. Make sure that the seatback is securely latched in position. Adjust the head restraint so that the top of it is level with the top of your head. Lift the armrest past the vertical position. Push the armrest fully downwards.

Slowly lift the armrest to the desired height. Pull the handle and remove the activity console. Remove the centre seat cusion. Install the centre seat cushion.

Ignition and all General points on starting main electrical circuits are disabled. The ignition key should not be left in If the battery has been disconnected this position for too long to avoid the vehicle may exhibit some unusual discharging the battery. Select park or neutral. Fully depress the accelerator pedal and hold it there.

Fully depress the clutch pedal. Fully depress the brake pedal. This could cause Stop refuelling after the fuel a chemical reaction.

Your Ford dealer can give you advice on improving your fuel consumption. This could lead to the inadvertent selection of 2nd gear and can cause damage to the transmission. Release the parking brake. Selector lever positions 2. Release the brake pedal and press the accelerator pedal. Page 92 Transmission Press the button on the selector lever Drive to select reverse and park.

Select drive to shift automatically The selector lever position will be through the forward gears. Insert a flat-bladed screwdriver gradients there may be a tendency into the slot. Push downwards on the shift between 4th and 3rd gears. The switch will illuminate. Press the switch again to turn the system on.

The system will be switched on automatically every time you switch the ignition on. For item location: See Quick start page 8. The parking aid does not relieve Switching the parking aid you of your responsibility to on and off drive with due care and attention. Page Parking Aid Parking aid Manoeuvring with the You will hear an intermittent tone at parking aid a distance of up to centimetres 71 inches between the obstacle and rear bumper, 80 centimetres 31 inches between the obstacle and front bumper and 60 centimetres 24 inches to the side.

Page Load Carrying Load carrying 1. Pull the luggage cover towards you and remove it. Use load securing straps to an approved standard, e. Never leave the detached tow ball arm unsecured inside the ST vehicles are not approved Do not modify the trailer coupling. Do not disassemble or repair the tow ball arm. Before starting your journey, ensure E the tow ball arm is properly locked. Remove the tow ball arm.

Insert the plug into its seat. Vary your speed frequently If the low fuel level warning lamp and change up through the gears comes on, refuel as soon as possible. E The switch is located behind the glove box. If no fuel leak is apparent, reset the switch by pushing in the button.

Turn the ignition switch to position II. After a few seconds return the key to position I. Make a further check for leaks in the fuel system. Have repairs to the electrical system and the replacement of relays and high current fuses carried out by a properly trained technician.

Switch the ignition and all electrical equipment off before touching or attempting to change a Page Fuses Fog lamps Horn Lighting control Daytime running lamps Windscreen wipers Automatic transmission or Durashift EST Rear window wiper Engine management diesel or catalytic converter Heated windscreen Starter motor Heated rear window Audio system and diagnostic connector Heated exterior mirrors Engine management or electronic module Electric exterior mirrors Open the glove box and empty the contents.

Press the sides inwards and swivel the glove box downwards. The steering lock will engage and the direction indicators and brake lamps will not work if you do not. The brake servo and the power steering pump do not operate unless the engine is running.

See Brake and and resale value. There is a large clutch fluid check page See Washer professional servicing expertise. We fluid check page Pull the lever. Open the bonnet and support it with the strut. Closing the bonnet Note: Make sure that the bonnet is closed properly. Page Engine Compartment Overview – 1. Brake and clutch fluid reservoir right-hand drive : See Brake and clutch fluid check page Engine oil filler cap Page Maintenance Engine compartment fuse box.

See Fuses page Battery: No maintenance necessary. Windscreen and rear window washer fluid reservoir: See Washer fluid check page Air cleaner: No maintenance necessary. Engine coolant reservoir Brake and clutch fluid reservoir right-hand drive : See Brake and clutch fluid check page Engine oil filler cap : See Engine oil check page Page Maintenance Brake and clutch fluid reservoir right-hand drive : See Brake and clutch fluid check page Engine oil dipstick : See Engine oil check page Page Engine Coolant Check Remove the oil filler cap.

E Top up with oil that meets the Ford Note: Check the oil level before specification. See Technical starting the engine. Note: Make sure the vehicle is on Replace the oil filler cap.